Decode and show video stream from connected camera or any other video device

Use all video ports (HDMI-0 and HDMI-1 or HDMI-0 and DSI)

These flips apply to all native video outputs (DSI, HDMI-0, and HDMI-1). Only the video is flipped - other on-screen elements are not affected!

Vertical flip
Horizontal flip

Secondary display custom rotation (only for the secondary display). Only the video is rotated - other on-screen elements are not affected!

Keep aspect ratio
Letterbox format
Smooth video (possibly increased delay)

Source video crop (x,y,w,h). Empty or 0,0,0,0 - no crop

Pause video GPIO pin (empty - don't use pause pin)

Display name

Current video mode

Video output

Output video on HDMI-1 (RPI4 only)

Display name

Current video mode

Output video on DSI display

After these options changes need to reboot the device!

DSI display vertical flip (this will break the work of H265 decoder for DJI Fly!)

Ignore DSI display

Enable SPI display

Rotate SPI display 180 degree

SPI display model

Only for Raspberry Pi 3B/B+, 3A+, Zero and Zero2. This is not the OSD from the Goggles!

OSD enable

OSD borders

Show FOV frame

Top/bottom offset

Left/right offset

Opacity (0-100)

Enable touchscreen

Touchscreen device ID